Operation Manual

5-22
5
Using the P Playback Mode Functions
● Tips on erasing images using [PROTECT] and [ERASE ALL]
For example, if you have 100 recorded images and you want to keep just 5 or 6 of those, erasing
the images one by one would be very time consuming.
In cases like this where you have a large number of images recorded and only want to keep a few,
[PROTECT] and [ERASE ALL] can be used very effectively to make the process much simpler.
Deleting all the DPOF print settings
From step 3 in “Specifying DPOF settings” : on p.5-19
4 Use
U
or
D
on the 4-way button to select
[ALL RESET] and then press
R
.
5 Use
U
on the 4-way button to select
[EXECUTE] and then press the OK button
E
.
All the print settings are deleted and the step 4 screen
reappears.
Begin by protecting the images you want to keep.
1 In the MULTI playback screen ( p.5-3), press the MENU
button
K
to display the menu icons and then select PROTECT
[ ].
2 Use
L
or
R
on the 4-way button to select an
image you want to keep. Then select [SET]
and press the OK button
E
to protect the
image. Then repeat this step to protect the
other images you want to keep.
Finecam_E.book Page 22 Thursday, August 28, 2003 6:21 PM