Technical data

exposure load of the film, avoid advancing the film any further. If forced,
the film may tear away, making it impossible to rewind it into its cassette.
2. Give the film rewind release button on the camera base a push. This
button will reset automatically when the film advance lever is
manipulated; therefore, it is unnecessary to keep it depressed with your
fingertip during film rewinding operation.
3. Fold out the film rewind crank-handle and turn it in the direction of the
arrow. As soon as the crank-handle is rotated, you will hear an audible
signal indicating that the take-up spool is turning in reverse and the film
is being properly rewound into its cassette. When the film pulls away
from the take-up spool, the audible signal will cease and you will feel an
increased resistance; however, continue winding until the crank-handle
rotates freely without resistance. Then, open the back cover and take out
the film cassette.
4.butkus.org
· If the film fails to advance part way before the entire length has been
exposed, do not attempt to wind it forcefully. Instead, push the film
rewind release button and rewind the film into its cassette.
FEATURE OUTLINE
Magnetic Release
Your CONTAX RTS features a magnetic release of a unique design which opens new horizons in system
application.
Unlike the mechanical shutter release featured on other SLR models, this magnetic release trips the shutter
instantaneously with minimal stroke and feather-touch fingertip pressure, thus preventing camera shake. It also
permits direct use of various off-hand controls. Its principal advantages can be summarized as follows: