Technical data

(Keep the shutter control dial at the 'AUTO' setting and the exposure

compensation pointer aligned with 'X 1'.)

1. Press the LED display pushbutton and check the shutter speed.

2. While keeping the pushbutton depressed, turn the aperture ring until

the LED dot aligns with the figure corresponding to the desired shutter

speed.

The following table gives you a guide for preselection of the shutter

speed:

Subject Shutter Speed

Fast-moving subjects

Landscape or general outdoor

photography

Indoor or night photography

1/2000, 1/1000, 1/500 sec

1/250, 1/125 or 1/60 sec.

1/30 sec. or slower speed

· When shooting sport scenes or moving automobile, set the shutter

speed at 1/500 sec. or higher speed. The foregoing shutter speed

preselection guide is based on using ASA 100 film.

FILM UNLOADING

Make sure the exposed film is rewound into its cassette before unloading

it.

1. When the exposure counter registers the figure equivalent to the