Technical data

1. When the LED dot comes on in alignment with a
figure below '30', correct exposure will be obtained,
but utmost precaution must be taken to prevent
camera shake. To prevent erratic movement of your
camera at the critical moment of exposure, (1 ) reset
the aperture ring to a wider lens opening in order to
provide automatic setting of a higher shutter speed,
or (2) mount the camera on a tripod.
2. When the LED dot comes on in alignment with
'A', stop down the lens aperture so that the LED dot
aligns with 2000 (1/2000 sec.) or smaller figure.
3. When the LED dot comes on in alignment with 'B'
set the aperture ring to a wider lens opening. If the
LED dot fails to move upward even at maximum
aperture, resort to flash exposure.
Semi-automatic exposure through preselection of the shutter speed