Technical data

3. Press tag LED display pushbutton while sighting through the
viewfinder.
Depression of this pushbutton provides a check of exposure condition before
or after film wind.
If the LED dot comes on within the range of 2000 (1/2000 sec.) and LT (4
sec.), it indicates that correct exposure will be obtained at the preselected
aperture.
In case two LED dots appear, it is an indication that an in-between shutter
speed will be set automatically.
· One LED dot indicates automatic setting of
the shutter speed corresponding to the figure
in alignment.
· Two LED dots indicate automatic setting of the shutter speed
between the settings in alignment.4.butkus.org
4. Advance the film and press the magnetic release.
If the LED dot displays a shutter speed of 1/30 sec. or longer
exposure, hold the camera steady to prevent erratic movement at