Technical data

FILM LOADING
Avoid direct sunlight when loading the film.
1. After sliding up the rubber eye-cup, open the back cover by pulling
out the film rewind knob. As soon as the back cover is opened, the
exposure counter will reset to 'S' (start position).
2. Place the film cassette in the film cassette chamber and push the film
rewind knob back to its original position.
· Use a standard 35mm cassette film of 12, 20 or 36 exposure load.
3. Clip the film tip on the take-up spool as
illustrated.
· Avoid inserting the film tip farther than is
necessary.