User`s manual

12/06/99 3
PVAS-30 SPECIFICATIONS
Input Voltage 12-28 Volts
(24 Volt Battery System Max)
Maximum Output Current 5 AMPS
Maximum Input Current 10 AMPS
Maximum Surge Current 15 AMPS
Maximum Output Power 150 Watts (30V @ 5A)
FEATURES
1.) Current Boosting for matching the load requirements of the pump, in low
sunlight conditions.
2.) Voltage Boosting for maximum pump output, in good sunlight conditions.
3.) Voltage Regulation of the PV array around its maximum power point.
4.) Built in controller protection:
A. Over temperature cut off
B. Lightning suppression
C. Reverse polarity protection. (10 Amps max)
5.) Weathertight cast aluminum enclosure with a hinged cover.
6.) On/Off switch.
7.) Voltage limiting for pump system protection.
8.) Remote float switch circuit.
9.) Low water cut-off circuit with adjustable set points.
10.) Reversible low water cut-off to high water cut-off circuit.
11.) Power in and power out indicators.
12.) Over-voltage fault indicator.
13.) Safety style terminal blocks.
14.) Strain relief connectors.
15.) Pre-adjusted voltage settings from a six position DIP switch.
16.) Voltage adjusting pot for precision voltage, adjustments.