Specifications

Mains disconnect switches
Features
Photo 4 shows the front view of the mains
disconnect switches.
The main characteristics are printed in the upper
part of the device
1 . These are:
- Switching capacity
- Operating voltage
- Wiring diagram
- 6-digit ordering code
Related to the switching capacity, versions in 40,
63, 80 and 100A exist.
All devices can be used up to 440V.
The red handle
2 draws the attention to the fact
that this is a mains disconnect switch.
All types are equipped with 50mm
2
safety terminals
3 with captive Pozidriv screws. The terminal
position is aligned with the terminal-position of the
MCB’s offering the benefit of interconnecting both
devices with a pin or fork-type busbar.
Easy DIN-rail extraction as implemented on the
MCB’s and RCD’s is also applicable due to the
same DIN-rail clip
4 .
The function of the circuit that is operated by the
switch can be indicated behind the circuit indicator
5 i.e. hall, living, garage, … .
Text for specifiers
- The mains disconnect switches all have the
CEBEC approval mark
- 1 pole per module
- All switches have a high interrupting capacity
thanks to the double contact interruption per pole
- The switches can be used as mains disconnect
switches
- The captive Pozidriv terminals guarantee a solid,
reliable connection for wires with a cross section
going from 6 to 50mm
2
- The terminals have an IP20 protection degree
- DIN-rail mountable
- Equipped with a transparent circuit indicator
- The short-circuit resistance is better than 3kV
- The switches can be locked both in the on as well
as the off-position
- The switches are suitable to be used in class
AC22
T4.4
GE Power Controls
Comfort Functions
T4
photo 4
5
4
3
2
1