Specifications

Aster
Switches and push-buttons
Introduction
The Aster family of devices covers 3 sub-families:
- Switches and push-buttons 16 and 32A
- Rotary switches 32, 40 and 63A
- Mains disconnect switches in 40, 63, 80 and 100A.
Function
The 16 and 32A switches and push-buttons are
mainly used to operate lighting and heating
equipment in the commercial sector. For example in
warehouses, shops, workshops, hospitals, etc.
Rotary switches are mainly used as main switch.
Also in case of motor-loads, this switch can be used.
In case absolute safe disconnection is required, the
mains disconnect switch is to be used.
Switches and push-buttons
Features
Photo 1 shows the front view of the modular
switches and push-buttons.
The main characteristics are printed in the upper
part of the device
1 These are:
- Switching capacity
- Operating voltage
- Wiring diagram
- 6-digit ordering code
Related to the switching capacity, a 16 and a 32A
family exists.
All devices can be used up to 240V.
For the on-off switches, a green-on and red-off
indication on the toggle itself is present to indicate
the status of the switch
2 .
Alternatively, these devices are also available with
an indication lamp
3 to indicate its status.
Push-buttons are available both with
4 and without
5 a lamp.
The function of the circuit that is operated by the
switch or push-button can be indicated behind the
circuit indicator
6 i.e. hall, living, garage, … .
The Pozidriv terminals
7 are clearly marked and are
all captive.
Text for specifiers
- The modular switches and push-buttons all have
the CEBEC approval mark
- The 1, 2, 3 and 4-pole 16 and 32A switches are
available in only 1 module, while the 3 and 4-pole
devices are also available in 2 modules
- All switches and push-buttons have a high
interrupting capacity thanks to the double contact
interruption per pole
- The captive Pozidriv terminals guarantee a solid,
reliable connection for wires with a cross section
going from 1.5 to 10mm
2
- The terminals have an IP20 protection degree,
- The devices are DIN-rail mountable
- The switches and push-buttons are equipped with
a transparent circuit indicator
- The short-circuit resistance is at least 3kV
- The switches can be locked both in the on as well
as in the off-position.
T4.2
GE Power Controls
Comfort Functions
photo 1
T4
1
2
6 6
3
7
5
4