Installation Manual

Size 86 x 86 x 40mm (3.4 x 3.4 x 1.6in)
Weight 180g (0.4lb)
TÐÆìĊðÆăOðåÐ ǤǟǟșǟǟǟĨīÐĮĮÐĮ
Install Location Hollow wall or door
ZĨÐīĴðĊæ}ÐĉĨÐīĴķīÐ ȭǢǟɰĴďǦǟɰȧȭǡǡɰ9ĴďǠǤǧɰ9Ȩ
ZĨÐīĴðĊæ>ķĉðÌðĴř ǟɛǨǤɦȧīÐăĴðŒÐìķĉðÌðĴřȨ
Panel Material PC
ķīīÐĊĴtĴðĊæ ǠǥɩǡǤǟ
Output Contact NO/COM
'ŘðĴķĴĴďĊwĨÐÆðťÆĴðďĊĮ
Exit Button Installation
1. Connect the wires per the wiring diagram section.
2. Pry the plastic faceplate away from the switch body.
3. Tuck the wires into the wall to sit behind the switch.
4. Secure the switch to the desired location using two screws.
ǤȘwĊĨĴìÐåÆÐĨăĴÐÅÆāðĊĴďĨďĮðĴðďĊœðĴìťīĉĨīÐĮĮȘÐĮķīÐ
all the corners snap back into place.
ACCESS PANEL INSTALLATION 7