Installation Manual

INSTALLATION TEST 19
ȧǧǤǤȨȭǡǣǧȭǧǠǣǣ
[e-mail]
For more information on how to set up
manager and resident access, please
scan the QR code or reach us at:
With the components installed and wired, please carry out this
simple test to ensure that the Rently smart access control
system was installed correctly and is fully functional.
To ensure that the wiring was done correctly, please press the
exit button to see if the lock releases for a few seconds.
If the test fails, please reexamine the installation and wiring of
the Rently smart access control system.
If the test is successful, please install and power on your Rently
Hub. The hub will automatically connect to the Rently smart
access control system when powered on.
Once the light on the back of the hub is solid blue, you are all set.