Installation Manual
'ăÐÆĴīďĉæĊÐĴðÆOďÆāwĨÐÆðťÆĴðďĊĮ
This type of lock may be used on wood, glass, metal, and
ťīÐĨīďďåÌďďīĮȘ
Disassemble the hardware as shown above. If your door is more
than 42mm thick, continue with the standard mounting method.
Otherwise, see the section for thin doors.
Double Door Single Door
1. Remove the screw holding the cover
in place, and then remove the cover.
2. Unscrew the bolts underneath
with the hex key.
3. Use the hex key again to loosen the
mounting plate screws.
4. Unfold the mounting plate
from the lock body.
Electromagnetic Lock Installation
Mounting Plate
Screw Hole
Location Pin
Lock Body
Armature Plate
Anti-Magnetic Pin
Armature Plate
Rubber Ring
Washer
Nut
Wire Hole
Mounting Plate
LOCK TYPE INSTALLATION 11