Installation Manual
Metal Lock Bracket Installation
1. Measure the gap between the door leaf and door frame.
2. Install the top bracket according to the diagram. Set the screw,
keeping the screw head inside the U-shaped slot.
3. Put the rubber mounting plate and iron mounting plate into the
U-shaped slot. For easier installation, you may use double-
sided adhesive between the rubber mounting plate and the
U-shaped slot.
4. Secure the top bracket in the correct position with 4 screws.
ǤȘAĊĮĴăăĴìÐĉæĊÐĴðÆăďÆāÆÆďīÌðĊæĴďĴìÐÌðæīĉȘ
6. Put the bottom bracket on the glass door.
7. If the door gap is too big, put the paper shim inside, adjust the
æĨĴďǡĉĉÅÐĴœÐÐĊĴìÐÅīÆāÐĴĮșĴìÐĊťŘœðĴìǣĮÆīÐœĮȘ
8. Install the lock plate. Make sure the back of the lock plate is
installed with a rubber gasket to absorb the impact of opening
and closing the door.
9. Turn on the power and test the locks to ensure that they are
working properly.
LOCK TYPE INSTALLATION 10