Instructions / Assembly

INSTALLATION GUIDELINES
SM-RIB CLOSURE STRIPS
These installation guidelines are for use with typical or standard applications. Refer to SM-Rib installation guide for panel and flashing install details.
It is always recommended to seek advice from a licensed professional, and to check with your local building inspector or building permit office for
approvals and possible variations that may apply.
CAUTION!
Working above grade is inherently dangerous, be sure that proper fall protection measures are in place.
When working with power tools and sheet metal, gloves and eye protection are absolutely required.
Ridge Cap
Outside Closure
SM-Rib Panel
Inside
Closure
Eave Flashing