Operation Manual

41
Inserting accessories
The accessories are equipped with a locking function. The
locking function prevents the accessories from tilting when they
are pulled out. The accessories must be inserted into the
cooking compartment correctly for the tilt protection to work
properly.
When inserting the wire rack, check
■ that the lug (a) is pointing downwards
■ that the lug (a) is in the rear part of the wire rack
When inserting the baking tray or the universal pan, check
■ that the lug (a) is in the rear part of the of the accessory
■ that the sloping edge of the accessory faces towards the
appliance door when it is inserted
Shelf positions
The cooking compartment has four shelf positions. The shelf
positions are counted from the bottom up.
Optional accessories
You can purchase optional accessories from the after-sales
service or specialist retailers.
Before using the appliance for the first time
Clean your appliance before using it for the first time.
1. Remove accessories and any remaining packaging from the
cooking compartment.
2. Clean the accessories and cooking compartment with hot
soapy water (see section: Cleaning and care).
3. Heat with % Top/bottom heat at 240°C for 60 minutes.
4. Afterwards, wipe the cooled cooking compartment with hot,
soapy water.
5. Clean the outside of the appliance with a soft, damp cloth
and soapy water.
Operating the appliance
In this section, you will find out how to switch your appliance on
and off, and how to select an operating mode and temperature.
Switching on the appliance
Oven lighting
Turn the operating mode and temperature selector clockwise to
the \ position to switch on the oven lighting.
Top/bottom heating
Turn the operating mode and temperature selector clockwise to
the required temperature to switch on the Top/bottom heating
operating mode.
Top heating
Turn the operating mode and temperature selector clockwise to
the # position.
Bottom heating
Turn the operating mode and temperature selector clockwise to
the $ position.
The r indicator light lights up while the appliance is heating up
and during any subsequent heating.
Switching off the appliance
1. Turn the operating mode selector back to the Û position.
2. Turn the temperature selector back to the Ú position.
After the appliance is switched off, the cooling fan may
continue to run.
D
D
D
D
Accessories Order no.
Baking tray, aluminium CZ 1332 X0
Baking tray, enamelled CZ 1342 X0
Universal pan with wire insert CZ 1242 X1
Wire insert for roasting and grilling, to be
used in the universal pan
740766
Baking and roasting wire rack CZ 1432 X1
Pizza tray CZ 1352 X0
System steamer CZ 1282 X3
Telescopic shelf x2 CZ 1702 X2
Telescopic shelf x3 CZ 1742 X2
Telescopic shelf with full extension x4 CZ 1755 X2