User Manual
CON3095 INSTALLATION
2-Piece RJ45 Connectors for Solid Cat6
These RJ45 Connectors are perfect for use with Solid Cat6 cable and
makes for quick, reliable terminations. With the 2-piece design, these
connectors make installation easier than ever.
5
Push load bar (A) until it
hits the jacket and the
conductors are exposed
at the other end.
A
1
Components.
1. Cable (not included)
2. Load Bar (A)
3. Plug Housing (B)
A B
3
Untwist the pairs
arranging them in the
proper order (shown
above).
7
Insert into plug housing
(B). Push forward until
conductors engage their
openings.
A B
6
Cut excess wire at the
end of the load bar (A).
A
2
Cut cable jacket exposing
approximately 1¼of the
twisted pairs.
1¼"
8
Plug is ready to
terminate using a crimp
tool.
4
Cut conductors at an
angle. Slip load bar (A)
over conductors.
B
A
1
2
3
4
5
6
7
8
O/W
O
G/W
B/W
B
G
BR/W
BR
T568B
1
2
3
4
5
6
7
8
O/W
O
G/W
B/W
B
G
BR/W
BR
T568A