User Manual

STEP 3.1: WIRING APPLICATION

Line Voltage Connections (refer to Fig. E):

1. Use a standard Single-Gang Device Box.

2. Insert the device box into the desire position on the CON1001 Entertain-

ment Box. Attach from the inside.

3. Route the electrical wires to the device box. Be sure to choose an adequete

line voltage device trhat is suitable for the desired application.

NOTE: For complete wiring instructions consult the installation guide

specific to the individual device.

4. If applicable, install the appropriate size wallplate by attaching it to the

device box and the device.

NOTE: Use the screws most suitable for securing the wallplate. Consult the

wallplate specifications to determine any recommended usage.

5. To install additional devices use the remaining positions on the CON1001

Entertainment Box and repeat steps 1 through 4. For unused slots, attach

the Quick-Snap cover plate.

Figure E

Device Box

Line Voltage

Wires To

Device