User Manual

INSTALLATION INSTRUCTIONS

STEP 1: TURN OFF POWER

Switch power off at circuit breaker or fuse. Test that power is off before you

begin any work with wiring.

WARNING: FAILURE TO CUT POWER BEFORE WORKING WITH ELECTRICAL

COMPONENTS MAY RESULT IN A FIRE OR CAUSE INJURY, SHOCK, OR DEATH.

STEP 2.1: MOUNTING - New Construction

Stud Mounted Installation (refer to Fig. A and Fig B):

1. Choose the optimal location.

2. Be sure to allow for wallboard material thickness when mounting.

NOTE: Within a 3/8” range, the frame will hide minor imperfections or

visible holes after you mount the wallboard around the CON1001

Entertainment Box. Refer to Fig. A and Fig. B.

3. Using two (2) #10 Wood Screws (supplied), secure the CON1001 enclosure

to the stud. Refer to Fig. A to locate mounting slots.

4. Once wallboard is mounted around the enclosure with about an 8.0” x 7.2”

cut-out in place, mount the low profile frame to the CON1001 Entertain-

ment Box. Refer to Fig. B.

5. Secure the low profile frame using four (4) #8 screws.

NOTE: You will not need to use the #6 Screws with Swing Clips when

installing the CON1001 Recesses Entertainment Box in a new construction

environment.

ONOFF

ONOFFONOFF

ONOFF

Figure A

Screws (2)

Stud

Mounting

Slots

Entertainment

Box

Figure B

#8 Screws (4)

Approx.

3/8" (0.95)

margin on back

of frame to

cover wallboard

Low Profile Frame

Wallboard