User`s guide

Amulet High Definition Television Receiver User’s Guide



FRONT PANEL AND REAR PANEL

Figure 2-1 Amulet Front Panel

Part Name Description

1. Standby Switch Power up or put Amulet in standby mode

2. Standby / On Indicator Orange in standby mode and starting

Green when started

3. Front Panel Display Start-up messages

Clock after starting

4. IR receiver Remote control IR receiver

5. Arrow Keys UP arrow for setting HDMI and Component resolution

Other usage according to middleware

6. OK Button Trigger remote registration mode

Other usage according to middleware

7. Reset Pin Hole Restart Amulet

Figure 2-2 Amulet Rear Panel

Part Name Description

1. DIGITAL AUDIO S/PDIF digital coaxial RCA audio output

2. S-VIDEO S-Video output

3. AUDIO LEFT / RIGHT Composite audio output

4. VIDEO Composite video output

5. Y Pb Pr Component video output

6. OPTICAL AUDIO S/PDIF digital optical audio TOSLINK output

7. HDMI HDMI output

8. ETHERNET RJ45 plug for connecting to ADSL modem or network access equipment

9. RF TV Type-F connector for RF TV output (factory set to channel 10)

10. COAX OUT Type-F connector for HomePNA coaxial output (optional feature)

11. TO LINE RJ11 plug for connecting HomePNA phone wire output (optional feature)

12. DC INPUT DC power jack