User`s manual

Introduction

1 Introduction

1.1 About Intraskan DC

The Intraskan DC High Frequency Intraoral X-ray has been engineered and manufactured to provide many

years of reliable service. The system houses two microprocessors, one for control/supervisory functions

and another to provide the user/machine interface. The technology incorporates feedback circuits to en-

sure accuracy and reproducibility of X-ray output for dental diagnostic radiography. The Intraskan DC will

create radiographs of excellent quality, performing equally well using digital or film-based imaging media.

The High Frequency Intraoral X-ray is hereafter referred to as Intraskan DC in this manual. Review and

follow the guidelines included in both this manual and the User’s Manual supplied with the equipment to

thoroughly become familiar with the installation requirements as well as operating and safety procedures.

This will ensure that your Intraskan DC gives you the highest level of service.

1.2 Scope of this Manual

This manual provides trained service technician with the necessary information for installation/setup for

all Intraskan DC models listed by Table 1-1. This manual or the User’s Manual supplied with the equip-

ment is not to be used as a replacement for training in radiography. The User’s Manual supplied with the

Intraskan DC provides instructions for the day-to-day operation and maintenance of the Intraskan DC.

This manual is intended for the installation and performance of the unit. It contains safety tips to prevent

unwanted X-ray exposures, physical injury and proper functioning of the equipment. The manual also cov-

ers debugging of anticipated problems and their correction. Location and meaning of the various labels

are provided.

Review and follow the procedures included in this Installation and Service Manual to ensure precision

installation of the Intraskan DC allowing the accuracy and reproducibility of X-ray output.

1.3 Symbols in this Manual

The following caution symbol is used in this manual.

Table 1-1. Intraskan DC Models

Description Part No.

Intraskan DC, FS05 , Wall Mount 15” arm without remote switch 9992720300

Intraskan DC, FS05 , Wall Mount 24” arm without remote switch 9992720200

Intraskan DC, FS05 , Wall Mount 33” arm without remote switch 9992720000

Caution Symbol

Used in this manual to alert users to important

instructions that require caution. Since the in-

structions following this symbol relate to person-

nel safety, they must be read carefully to avoid

any problems or injuries.

Note! Symbol

This symbol points to an important detail / tip

in the operation of the unit. Read carefully to

avoid any problems.