User`s manual
11
4 Pre-Installation Requirements
Make sure the location allows sufficient space for movement of the arms in the extended condition.
4.3.2 Site Environment Requirements
The unit is designed for indoor usage.
It should not be subjected to direct sunlight for expanded duration.
Mount it away from sources of liquid ingress.
If The X-ray unit is stored below 10° C , time must be allowed for X-ray unit to reach room temperature
before connecting it to the mains voltage.
Figure 3
Figure 2
Figure 5
Figure 4
The scissor arm with tube head attached is shipped tied close. Do not remove the locking system
holding the scissor arm in folded position until directed during installation. Always make sure
to hold both arms of the assembly simultaneously while lifting or moving the Scissor Arm.