Installation manual

2–72 Hardware installation
Systems with non–Jupiter–controlled router (manual key routing). In stand–alone or internal matrix systems where
the key signals are not available through a Jupiter–controlled routing switcher, any of the four ISO inputs can be used.
However, in this case the fill and key signals must be manually switched to the appropriate connector (or they could be
hard–wired). For configuration information, see page 3–60.
Installations with Multiple Systems
Multiple system
§
video wiring follows the guidelines already discussed. A special aspect is “Automatic Monitor Switch-
ing Using A Sequence Set.” described on page 3–11.
DVE Option
An overview of the DVE option can be found on page 2–86.
For complete installation and operating instructions, please refer to the DVE Option Installation and Operating Manual,
part no. 04–050183–002.
§
A Saturn “system” consists of one video channel and its associated audio channels.