User manual

180 Element User Manual
Clicking on a CEM+ / CEM3 in the {About System} list will open the About Rack display, which
shows the following information about the rack:
• Rack Name (displays as the title)
• Type
• Ambient Temperature
• Phase A,B,C Voltages
• Frequency
• System Number
• IP Address
• Software Version
• Rack Errors
Buttons available in the About Rack screen are {Activ. Preset}, {Deactiv. Preset}, and {Clear
Errors}.
Clicking on a FDX rack in the {About System} list will open the About Rack display, which shows
the following information about the rack:
• Rack number
• Rack Type
• Phase A,B,C Voltages
• Frequency
• System Number
• IP Address
• Software Version
Note:
Clearing CEM+ / CEM3 errors from Element will be temporary unless the errors
have been fixed at the CEM+ / CEM3. Errors displayed on Element will clear on
their own once they have been cleared from the CEM+ / CEM3. Some CEM+ /
CEM3 errors can only be cleared at the CEM+ / CEM3.