Full Product Manual

Table Of Contents

Door Reversal

1. Unplug the appliance.

2. Remove the 2 plug buttons on the top of the unit.

3. Remove the plastic hinge cover by lifting from the back and

pulling forward.

4. Remove the 2 screws from the top hinge.

5. Lift the freezer door up oﬀ the center hinge. Place the freezer

door on a ﬂat surface with the outer surface facing up, as not

to damage the door.

6. Open the refrigerator door and remove the 2 screws attaching

the center hinge. Remove the center hinge.

7. Lift the refrigerator door up oﬀ the bottom hinge. Place the

refrigerator door on a ﬂat surface with the outer surface

facing up, as not to damage the door.

8. Tilt the appliance back to remove the 3 screws attaching the

bottom hinge. Remove the bottom hinge.

9. Remove the hinge pin from the bottom hinge and reinstall on

the opposite side of the hinge.

10. Reinstall the refrigerator door and then freezer door on the

opposite side, using the parts that have been removed.

The doors in this appliance can be reversed, so that they swing open in the opposite

direction. To reverse the doors, please follow the instructions below.