Instructions

2.6 Switch between dual and single colour LED modes

The controllers are compatible with dual colour LED lighting (warm and cool), or single

colour LED lighting (warm or cool). The factory setting is dual colour mode.

Depending on the colour mode, the and buttons on the paired remote(s) will function

dierently.

Colour mode

button button

Dual Warm white Cool white

Single Increase brightness Decrease brightness

Switching to single colour mode

In single colour mode, the and buttons control brightness levels on all LED lighting.

• Press and hold both “1” & ”2” for roughly 5 seconds until the LED lighting ﬂashes 3

times.

• The controller will now be in SINGLE color mode.

Switching to dual colour mode

• Press and hold the and buttons for roughly 5 seconds until the LED lighting

shows a transition color change.

• The controller will now be in DUAL color mode.

2.7 Environmental conservation notes

Please dispose of old batteries only at authorised collection points and not with general

household waste.

All electronic components which belong to the controller must be disposed of at authorised

collection points, electronic unit recycling points or by returning them to the manufacturers.