Instructions

11
1.2 General notes
All controller and remotes are plug and play ready (dimming, color changing and on/o).
1.3 Power ON/OFF
All channels
• Switch all channels ON by pressing "I".
• Switch all channels OFF by pressing "O".
Single channel
• You can switch a specific channel on by pressing the channel button (1,2,3, or 4) on
remote.
• To switch o, press the same channel button again.
1.4 Colour temperature
Adjust all channel colour temperature using the buttons marked with the symbols and
.
• Press and hold the button to make the light a warmer colour.
• Press and hold the button to make the light a cooler colour.
1.5 Dimming
• Turn on the channel that you would like to dim by pressing the channel button (1,2,3,
or 4) on the remote.
• Press and hold the selected channel button to adjust the brightness levels (maximum to
minimum and vice versa).
As soon as the button is released the level of brightness last reached will be set.
The level of brightness last set will be saved after the unit is switched o. Settings will
also be saved if the controller(s) are disconnected from the power supply.
1.6 Reset brightness and color temperature
Press and hold “1” and ”4” at the same time, all controller(s) paired to that remote will revert
to default settings of cool white colour temperature and 100% brightness level.