Operation Manual

16. Button Lock

The device features a button lock (emergency wheel is not locked) to prevent unin-

tentional adjustments e.g. by children.

Activating/deactivating the button lock

Proceed as follows to activate/deactivate the button lock:

• Hold down the “AUTO” button for about 3 seconds. The “button lock” symbol

starts flashing

• Press the “PROG” button shortly (within 2 seconds after letting go of the “AUTO”

button). The button lock is now active and the “button lock” symbol is dis-

played permanently.

Proceed in the same way to deactivate the button lock.

☞

Please note that the “PROG” button has to be pressed within 2

seconds after the “AUTO” button was held down for about 3

seconds.

17. Battery control

If the batteries in the actuator are exhausted, “bAtt” is dis-

played

(see right).

In this case, replace the exhausted batteries with new ones.

☞

Please note that the operating mode is not displayed when

“bAtt” is displayed. In addition, the operating mode cannot be

changed until the batteries have been replaced.