Operation Manual

• Then the month flashes. Set the correct month.

• Subsequently, the day flashes (the day of the week is dis-

played at the top of the display (2)). Proceed as described

above to set the correct day.

b) Setting the time (hour, minute)

•

After setting the date (year, month, day) and confirming by

pressing the “PROG” button, the time can be set. At first, the

hour flashes. Set the correct hour.

• After confirmation, the minutes start flashing. Proceed as

described above to set the minutes.

c) Automatic daylight saving time settings

• After the time (hour, minute) has been set, automatic day-

light saving time can be configured.

So: 1 = automatic daylight saving time active

So: 0 = automatic daylight saving time inactive

Press the “PROG” button to confirm your settings. Now, auto-

matic calibration of the actuator is carried out.