Certifications 2

Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau
Item no.: 2108424
Material Safety Data Sheet
6. Accidental Release Measures
Personal Precautions:
Restrict access to area until completion of clean-up. Do not touch the spilled material. Wear adequate personal protective
equipment.
Environmental Precautions:
Prevent material from contaminating soil and from entering sewers or waterways. Methods for containment: Stop the leak if
safe to do so. contain the spilled liquid with dry sand or earth. clean up spills immediately.
Methods for clean-up:
Absorb spilled material with an inert absorbent (dry sand or earth). Scoop contaminated absorbent into an acceptable waste
container. Collect all contaminated absorbent and dispose of .Scrub the area with detergent and water; collect all contaminated
wash water for proper disposal.
7. Handling &Storage
Handling:
Recharge batteries IAW methods specified in applicable technical manuals.
DO NOT:
· Overcharge this battery.
· Abuse, mutilate or short circuit the battery.
Storage:
Gain approval for storage areas from the Installation Fire Department. Store batteries in a cool (i.e., <130°F), dry and well
ventilated area.
DO NOT:
· Store batteries in direct sunlight or under hot conditions.
· Smoke and keep batteries away from open flame or heat.
· Store batteries in the same stacks with hazardous materials.
· Store batteries in office areas, or other areas where personnel congregate.
Page 4 of 7