Safety data sheet

ManualsBrandsCONRAD ENERGY ManualsButton CellsButton cell CR2450 Lithium CR 2450 600 mAh 3 V 1 pc(s)

Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau

Item no.: 650231

Material Safety Data Sheet

Page 1 of 6

1. Product & Company Identification

Product: Li-MnO

Button Cell (Lithium Metal Battery), CR2450

Manufacturer: Conrad Electronic SE

Nominal voltage: 3 V

Nominal capacity: 600 mAh

Address: Klaus-Conrad-Str. 1, D-92240 Hirschau

Telephone: +49 (0) 9604 / 40 - 8988

Date of issue: 30.01.2016

2. Composition/Information on Ingredients

Information about the chemical nature of product:

Ingredient Name CAS No. Concentration Weight

Stainless Steel 37.76% 2.341 g

Copper Polypropylene 9003-07-0 3.52% 0.218 g

Manganese powder 1313-13-9 40.13% 2.488 g

Lithium Sheet 7439-93-2 2.42% 0.15 g

Lithium Perchlorate 7791-03-9 4.42% 0.274 g

Diaphragm Polypropylene 9003-07-0 1.35% 0.084 g

Teflon® 9002-84-0 2.71% 0.168 g

Graphite 7782-42-5 2.71% 0.168 g

Propylene Carbonate 108-32-7 3.31% 0.2055 g

1,2-dimmethoxyethane 110-71-4 1.67% 0.1035 g

Teflon® is a registered trademark of DuPont.

Summary of content (6 pages)

PAGE 1
Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau Item no.: 650231 Material Safety Data Sheet 1. Product & Company Identification Product: Li-MnO2 Button Cell (Lithium Metal Battery), CR2450 Manufacturer: Conrad Electronic SE Nominal voltage: 3V Nominal capacity: 600 mAh Address: Klaus-Conrad-Str. 1, D-92240 Hirschau Telephone: +49 (0) 9604 / 40 - 8988 Date of issue: 30.01.2016 2.
PAGE 2
Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau Item no.: 650231 Material Safety Data Sheet 3. Independent Certification of Lithium-Manganese Button Cell Battery UN Transportation Model Regulation No Test Item Criteria Result T1 Altitude Simulation No mass loss, leakage, venting, disassembly, rupture, and fire. OCV should not be less than 90% before testing. Passed T2 Thermal Test No mass loss, leakage, venting, disassembly, rupture, and fire.
PAGE 3
Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau Item no.: 650231 Material Safety Data Sheet 5. First-Aid Measures Eyes: Flush with water for at least 15 minutes. If irritation occurs and persists, contact a medical doctor. Skin: Remove contaminated clothing and thoroughly wash with soap and plenty of water. If irritation persists, contact a medical doctor. Inhalation: Remove to fresh air. If breathing difficulty or discomfort occurs and persists, see a medical doctor.
PAGE 4
Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau Item no.: 650231 Material Safety Data Sheet 8. Handling And Storage Handling Specific safe handling advice: Never throw out cells in a fire or expose to high temperatures. Do not soak cells in water and seawater. Do not expose to strong oxdizers. Do not give a strong mechanical shock or throw down. Never disassemble, modify or deform. Do not connect the positive terminal to the negative terminal with electrically conductive material.
PAGE 5
Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau Item no.: 650231 Material Safety Data Sheet 10. Physical Data Physical state: Solid Form: Geometric solid Color: Metallic color (without outer PVC cover) Odor: No odor pH: Not Applicable Flash point: Not Applicable Explosion properties: Not Applicable Density: Not Applicable Solubility: Not Soluble 11. Stability And Reactivity Hazardous reactions may occur under some specific conditions.
PAGE 6
Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau Item no.: 650231 Material Safety Data Sheet 14. Transportation/Shipping Information US DOT All batteries are not subject to the requirements of the Department of Transportation (DOT) subchapter C, Hazardous Material Regulations since each battery meets the exceptions under 173.185 (b).