Datasheet


Page13of13
CR2450 ‐ 650231
SPECIFICATIONFORINSPECTIONS

Itisguaranteedthatthisspecificationoftheinspectionswillbefulfilledbyourproducts

1. QualityStandard
Theproductspecificationwillbeconformed.
2. UnitofInspections
Onebatterywillbetakenasoneunitofinspection.
3. DefinitionofLot
A batch of products that are manufactured by the same production lines with the same lot code
mark.
4. TestMethod
Theproductspecificationwillbeconformed.
5. SamplingPlan
Thefollowingtableisreferredandisonlyusedfortheinitialtest.

 InspectionItem InspectionPlan SamplingLevel A.Q.L 
1 Dimensions GB/T8897.2‐2008
ChinaNational
Standard

1.0
2 OpenCircuitVoltage GB/T8897.2‐2008
ChinaNational
Standard

1.0
3 Appearances GB/T8897.2‐2008
ChinaNational
Standard

1.5


MajorDef ect:Ifthereisfailureonthefunctionsoftheproducts,itwillbeconstruedasmajordefect.

Others:Defectthatisdistinguishedfrom MajorDefect.

Theoperatingfeaturesbyattributesareusedasabaseforsamplinginspections.





