Datasheet
Page10of13
CR2450 ‐ 650231
InstructionsforUsageandSafety
Thebatteryconsistsoflithium,organic,solvent,andothercombustiblematerials.Properhandling of
thebatteryisofutmostimportance;otherwise,thebatterycouldleadtodistortion,leakage(accidental
seepage of liquid), overheating, explosion, or fire and cause bodily injury or damage to equipment.
Pleasestrictlycomplywiththefollowinginstructionstoavoidtheoccurrenceofaccident.
WARNINGforHandling
DoNotIngest
Thebatteryshouldbepropertystoredandkeepawa yfromchildreninordertoavoidthemtoputit
intotheirmouthsandingestit.However,ifithappens,youshouldimmediatelytakethemtothe
hospital.
DoNotRecharge
Thebatter yisnotarechargeablebattery.Youshouldneverchargeitasitcouldgenerategasand
inte rnalshort‐circuiting,leadingtodistortion,leakage,overheating,explosion,orfire.
DoNotMakeHot
If the battery is being heated to more than 100degree centigrade,it would increasethe internal
pressureresultingdistortion,leakage,overheating,explosion,orfire.
DoNotBurn
Ifthebatteryisburntorputtoflame,thelithiummetalwillmeltandcauseexplosionorfire.
DoNotDismantle
The battery should not be dismantled as it wil l
cause damage to separator or gasket resulting
distortion,leakage,overheating,explosion,orfire
DoNotMakeImproperSetting
The improper setting of the battery could lead to short‐circuiting, charging or forced‐discharging
and distortion, leakage, overheating, explosion, or fire could be occasioned as a result.When
setting,thepositiveandnegativeterminalsshouldnotbereversed.
DoNotShort ‐circuitTheBattery
The short‐circuit should be avoided for positive and negative terminals.Do you carry or keep
battery with metal goods; otherwise, battery could occasion distortion, leakage, overheating,
explosion,orfire.
DoNotDirectlyWeldTheTerminalorWiretoTheBodyofTheBattery
The welding will cause heat and occasion lithium melted or insulating material damaged in the
battery.Asaresult,thedistorting,leakage,overheating,explosion,orfirewouldbecaused.The