Safety data sheet

Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau
Item no.: 650207
Material Safety Data Sheet
Page 1 of 5
1. Product & Company Identification
Product: Lithium-Manganese Button Cell Battery (Lithium Metal Battery), CR2330
Manufacturer: Conrad Electronic SE
Nominal voltage: 3 V
Nominal capacity: 260 mAh
Address: Klaus-Conrad-Str. 1, D-92240 Hirschau
Telephone: [phone] / 40 - 8988
Date of issue: 27.01.2016
2. Composition/Information on Ingredient
Information about the chemical nature of product:
Ingredient Name CAS No. Concentration
Stainless Steel 55.55%
Copper Polypropylene 9003-07-0 2.97%
Manganese powder 1313-13-9 32.04%
Lithium Sheet 7439-93-2 1.867%
Lithium Perchlorate 7791-03-9 7.33%
Diaphragm Polypropylene 9003-07-0 0.22%
3. Independent Certification of Lithium-Manganese Button Cell Battery UN
Transportation Model Regulation
No Test Item Criteria Result Remark
T1
Altitude
Simulation
No mass loss, leakage, venting, disassembly, rupture, and fire. OCV
should not be less than 90% before testing.
Passed
T2 Thermal Test
No mass loss, leakage, venting, disassembly, rupture, and fire. OCV
should not be less than 90% before testing.
Passed
T3 Vibration
No mass loss, leakage, venting, disassembly, rupture, and fire. OCV
should not be less than 90% before testing.
Passed
T4 Shock
No mass loss, leakage, venting, disassembly, rupture, and fire. OCV
should not be less than 90% before testing.
Passed
T5
External Short
Circuit
External temperature should not exceed 170 degC.
No disassembly, rupture, and fire within six hours of this test.
Passed
T6 Impact
External temperature should not exceed 170 degC.
No disassembly, and fire within six hours of this test.
Passed
T7 Overcharge No disassembly, and fire within seven days of this test. Passed Battery only
T8
Forced
Discharge
No disassembly, and fire within seven days of this test. Passed
We confirmed the test results based on the UN manual of tests and criteria 38.3