User manual

3.1 Image Viewing

To start the digital microscope, go to “Start > All Programs > USB Video Device >

AMCap” Once this is done, the LED light in the microscope should light up.

2. Put the object near the USB digital microscope, the distance between both

(lens and object distances) don’t exceed to 3cm.

3. Manually rotate the roller in the microscope to adjust the focus.

4. If the object is close enough to the microscope, there are two focus positions

which are the The lower and the higher.

- 04 -

Step 3: Once the installation is complete, click “Finish” .

Note: If the microscope image does not

appear on the screen, go to “Options”

on the menu bar and select “Preview.”