Datasheet

Product Specification Code S01F50004 Page 1/3
1. Applied Scope
This
2.
1210
3.
4.
product specification applies to1210 × 185 × 2.0mm product.
Size
x 185 x 2mm
Material
Magnet : EP-7S ； adhesive: 3M
Material Characteristics
4.1 Material Magnetic Characteristics
Item SI Units CGS Units
Residual flux density (Br)
180±15 mT 1800±150 Gs
Coercive force (Hcb)
103.4±16 KA/m 1300±200 Oe
Intrinsic (Hcj)
158±28KA/m
2000±350 Oe
Maximum (BH)max
5.6±0.8 KJ/m3 0.7±0.1 MGOe
4.2 Material Chemical Characteristics
Item TEST CONDITIONS Determined
Hydraulic At room temperature, 96 hours immersion excellent
Alcohol At room temperature, 96 hours immersion good
ketone, ethyl
ether
At room temperature, 96 hours immersion bad
Alkalescent At room temperature, 96 hours immersion good
Acids At room temperature, 96 hours immersion bad
4.3 Material Physical Characteristics
Density 3.70±0.1(g/cm
3
)
Hardness shore(D)=40～65
Bending Winding in cylindrical fixture does not produce Φ21mm fracture phenomena