Data Sheet

SPEC NO: DSAA6381 REV NO: V.8 DATE: APR/05/2005 PAGE: 1 OF 3

APPROVED: J. Lu CHECKED: Allen Liu DRAWN: B.H.LI

Package Dimensions

Notes:

1. All dimensions are in millimeters (inches).

2. Tolerance is ±0.25(0.01") unless otherwise noted.

3. Lead spacing is measured where the lead emerge from the package.

4. Specifications are subject to change without notice.

L-934GD GREEN

Description

The Green source color devices are made with Gallium

Phosphide Green Light Emitting Diode.

T-1 (3mm) SOLID STATE LAMP

Features



LOW POWER CONSUMPTION.



POPULAR T-1 DIAMETER PACKAGE.



GENERAL PURPOSE LEADS



RELIABLE AND RUGGED.



LONG LIFE - SOLID STATE RELIABILITY.



AVAILABLE ON TAPE AND REEL.



RoHS COMPLIANT.

PAGE 1
T-1 (3mm) SOLID STATE LAMP L-934GD Features GREEN Description LOW POWER CONSUMPTION. The Green source color devices are made with Gallium POPULAR T-1 DIAMETER PACKAGE. Phosphide Green Light Emitting Diode. GENERAL PURPOSE LEADS RELIABLE AND RUGGED. LONG LIFE - SOLID STATE RELIABILITY. AVAILABLE ON TAPE AND REEL. RoHS COMPLIANT. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.25(0.01") unless otherwise noted. 3.
PAGE 2
Selection Guide Part No. Dice L-934GD Iv (mcd) @ 10mA Lens Type GREEN (GaP) Viewing Angle Min. Typ. 2 θ 1/2 8 20 60° GREEN DIFFUSED Note: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. Electrical / Optical Characteristics at TA=25°C Symbol Parameter Device λpeak Peak Wavelength Green λD Dominant Wavelength ∆λ1/2 Typ. Max.
PAGE 3
Green L-934GD Remarks: If special sorting is required (e.g. binning based on forward voltage, luminous intensity, or wavelength), the typical accuracy of the sorting process is as follows: 1. Wavelength: +/-1nm 2. Luminous Intensity: +/-15% 3. Forward Voltage: +/-0.1V Note: Accuracy may depend on the sorting parameters. SPEC NO: DSAA6381 REV NO: V.8 DATE: APR/05/2005 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: B.H.