Datasheet

ManualsBrandsCONRAD COMPONENTS ManualsElectrical Installation MaterialsMagnetic pad White (L x W) 66 mm x 20 mm Content: 1 pc(s)

Product Specification No. S01F50113 Page 1/4

1. Applied Scope

This

S01

product specification applies to 67 × 20 × 1.5mm+ 0.2mm white PP synthetic paper

Part Name

F50113.

Material

Magnet : EP-7S

Material Characteristics

4.1 Material Magnetic Characteristics

Item SI Units CGS Units

Residual flux density (Br)

180±15 mT 1800±150 Gs

Coercive force (Hcb)

103.4±16 KA/m 1300±200 Oe

Intrinsic (Hcj)

158±28KA/m

2000±350 Oe

Maximum (BH)max

5.6±0.8 KJ/m3 0.7±0.1 MGOe

4.2 Material Chemical Characteristics

Item TEST CONDITIONS Determined

Hydraulic At room temperature, 96 hours immersion excellent

Alcohol At room temperature, 96 hours immersion good

A ketone,

ethyl ether

At room temperature, 96 hours immersion bad

Alkalescent At room temperature, 96 hours immersion good

Acids At room temperature, 96 hours immersion bad

4.3 Material Physical Characteristics

Density 3.70±0.1(g/cm

)

Hardness shore(D)=40～65

Bending Winding in cylindrical fixture does not produce Φ21mm fracture phenomena

Summary of content (4 pages)

PAGE 1
Product Specification No. S01F50113 1/4 Page 1. Applied Scope This product specification applies to 67 × 20 × 1.5mm+ 0.2mm white PP synthetic paper 2. Part Name S01F50113. 3. Material Magnet : EP-7S 4. Material Characteristics 4.1 Material Magnetic Characteristics Item SI Units Residual flux density (Br) 180±15 mT Units 1800±150 Gs Coercive force (Hcb) 103.4±16 KA/m 1300±200 Oe Intrinsic (Hcj) 158±28KA/m 2000±350 Oe (BH)max 5.6±0.8 KJ/m3 Maximum 4.2 CGS 0.7±0.
PAGE 2
Product Specification S01F50113 No. 2/4 Page 4.4 Reliability Test TEST CONDITIONS Item Weather ability Determined 63 ℃, carbon arc lamp irradiation good 40℃，90 ％RH，168 hour excellent Salt Spray Test ５％ Saline excellent Waterproof 65 ℃ of water, 25 ℃ saline, 30 minutes, 2 cycles excellent Ozone resistance 80ppm,25℃,72 hour Acceptable Moisture Resistance ,96 hour 5. Magnetization Specification P = 4.5mm, parallel to the length of magnetization, single-sided multi-polar, B ≥ 580GS 6.
PAGE 3
Product Specification Determine No. S01F50113 Page standard : C=0 7.3 Curve 1）Winding in cylindrical fixture does not produce Φ21mm fracture phenomena. 2）Determine standard : C=0 7.4 Appearance Test methods: visual, AQL=1.5 MIL-STD-105E-Ⅱ 8. Inspection Record " Inspection reports," With the goods counterparts. 9. Keeping Method To prevent rain and sunlight 10. Other 10.1 Move to take light-light. 10.2 Specification changes to be mutual consultation, agreed.
PAGE 4
Product Specification No. S01F50113 Page 1.5+0.1 -0.1 (w/o paper) 67+0.3 -0.3 20+0.3 -0.3 20+0.3 -0.