Datasheet

AXIAL SILASTIC GUARD JUNCTION STANDARD RECTIFIER
VOLTAGE RANGE 50 to 1000 Volts
6A05 THRU 6A10
CURRENT 6.0 Ampere
FEATURES
• Low coat construction
• Low forward voltage drop
• Low reverse leakage
• High forward surge current capability
• High temperature soldering guaranteed:
260℃/10 secods/.375”(9.5mm)lead length at 5 lbs(2.3kg) tension
MECHANICAL DATA
• Case: Transfer molded plastic
• Epoxy: UL94V-O rate flame retardant
• Polarity: Color band denotes cathode end
• Lead: Plated axial lead, solderable per MIL-STD-202E method 208C
• Mounting position: Any
• Weight: 0.07 ounce, 2.0 grams
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
• Ratings at 25
O
C ambient temperature unless otherwise specified
• Single Phase, half wave, 60Hz, resistive or inductive load
• For capacitive load derate current by 20%
SYMBOLS
6A05 6A1 6A2 6A4 6A6 6A8 6A10
UNITS
Maximum Repetitive Peak Reverse Voltage
V
RRM
50 100 200 400 600 800 1000 Volts
Maximum RMS Voltage
V
RMS
35 70 140 280 420 560 700 Volts
Maximum DC Blocking Voltage
V
DC
50 100 200 400 600 800 1000 Volts
Maximum Average Forward Rectified Current
0.375”(9.5mm) lead length at T
A
= 60℃
I
(AV)
6.0 Amps
Peak Forward Surge Current
8.3mS single half sine wave superimposed on
rated load (JEDEC method)
I
FSM
300 Amps
Maximum Instantaneous Forward Voltage @ 6.0A
V
F
0.95 Volts
T
A
= 25℃
10
Maximum DC Reverse Current at Rated
DC Blocking Voltage per element
T
A
= 100℃
I
R
1.0
µAmps
mAmps
Maximum Full Load Reverse Current, full cycle average
0.375”(9.5mm)lead length at T
L
=105℃
I
R(AV)
1.0 mAmps
Typical Junction Capacitance (Note 1)
C
J
150 pF
Typical Thermal Resistance (Note 2)
R
θJA
10
℃/W
Operating Junction Temperature Range
T
J
，
T
STG
-55 to +150
℃
Notes:
1. Measured at 1.0MHz and Applied Reverse Voltage of 4.0V Volts.
2. Thermal Resistance from junction to Ambient at .375”(9.5mm)lead length, P.C.board mounted with 1.1”× 1.1”
DIA
.360(9.1)
.340(8.6)
1.0(25.4)
MIN.
DIA
.052(1.3)
.048(1.2)
.360(9.1)
.340(8.6)
1.0(25.4)
MIN.
Dimensions in inches and (millimeters)