Datasheet

FEATURES
Low cost construction
Low forward voltage drop
Low reverse leakage
High forward surge current capability.
260/10 seconds, 0.375" (9.5mm)lead length
at 5 lbs (2.3kg) tension.
MECHANICAL DATA
Case: transfer molded plastic
Epoxy: UL94V - 0 rate flame retardant.
Polarity: Color band denotes cathode end.
Lead: Plated axial lead, solderable per MIL - STD - 202E
method 208C
Mounting position: Any
Weight: 0.012 ounce, 0.33grams
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25 ambient temperature unless otherwise specified
Single phase, half wave, 60Hz, resistive or inductive load.
For capacitive load derate current by 20%
SYMBOLS
1N4001 1N4002 1N4003 1N4004 1N4005 1N4006 1N4007
UNIT
Maximum Repetitive Peak Reverse Voltage
V
RRM
50 100 200
    Volts
Maximum RMS Voltage
V
RMS
35 70 140
    Volts
Maximum DC Blocking Voltage
V
DC
50 100 200     Volts
Maximum Average Forward Rectified Current,
0.375" (9.5mm) lead length at T
A
= 75
Peak Forward Surge Current
8.3ms single half sine - wave superimposed on
rated load (JEDEC method )
Maximum Instantaneous Forward Voltage at 1.0A
V
F
Volts
Maximum DC Reverse Current at rated
T
A
= 25
A
DC blocking voltage
T
A

A
Maximum Full Load Reverse Current, full cycle
average 0.375" (9.5mm) lead length at T
L
= 75
Typical Junction Capacitance (Note 1)
C
J
pF
Typical Thermal Resistance (Note2)
R
θJA
/W
Operating and Storage Temperature Range
T
J

Storage Temperature Range
T
STG

NOTES:
1. Measured at 1.0 MHz and applied reverse voltage of 4.0 Volts.
2. Thermal Resistance from Junction to Ambient at 0.375" (9.5mm) lead length, P.C. board mounted with 0.2" x 0.2"
(5.0 x 5.0mm) copper pads.
(-65 to +175)
(-65 to +175)



I
(AV)
I
FSM
I
R(AV)
50
Amp
Amps
High temperature soldering guaranteed:
A

30
15

I
R
GENERAL PURPOSE SILICON RECTIFIER
VOLTAGE RANGE 50 to 1000 Volts
CURRENT 1.0 Ampere
1N4001 THRU 1N4007