User manual

90
Fig. 11.1: The game Simulate of the Python Games
Our game PiDance is also based on the principle of this game. LEDs are flashing in random order. The user
has to press the buttons in the same order. With each round, another LED lights up, so that it becomes more
difficult to remember the order. One mistake, and the game is over.
The game is built on two breadboards, so that the buttons are located on the edge and can be operated
comfortably without accidentally pulling cables from the boards. For better stability, the breadboards can be
plugged together on the long sides.
Besides the connecting cables already known also four short jumpers are required. Use sharp pliers or a wire
cutter to cut about 2.5 centimeters long pieces from the supplied jumper wire and remove the 7 mm of the
insulation at both ends with a sharp knife. Form these pieces of wire into a U shape. Thus you are able to
link two rows on a breadboard.