Manualshelf

User manual

ManualsBrandsCONRAD COMPONENTS ManualsScience KitsCourse material Profi Lernpaket Internet of Things 14 years and over
12345678910
The module in station mode. The IP of the connected computer is highlighted.
2
AT+CWMODE=1 – the module in station mode
The command
AT+CWMODE=1
sets the module to station mode. This mode permits connecting to your WLAN-
router. This will also connect the module to the Internet and give it a lot more op-
tions.
You can first use the command
AT+CWLAP
to list all networks in range to check if your network is within reception range. To
connect to your router, you need the command