User manual

5.5 | Cheerlights
Today's experiment is based on a project by Hans Scharler that is called Cheer-
lights. The idea: Globally linked lights that can be simultaneously controlled via
Twitter commands. It is a good example of the
world growing closer and closer together with the
Internet.
The RGB-LED on the pinboard at pins D3, D5 and D6
The program
For today's program, you do not need to make any dedicated ThingSpeak-
changes. This project has a public channel that you can find under
https://thingspeak.com/channels/1417
. On that page, you will also always find the current colour and further information
on the project.
Required parts
1 x pinboard, 1 x NanoESP, 1 x RGB-LED, 3 x resistor
1 kOhm (brown-black-red), circuit wire