User manual

site has been adjusted and should be easy to
display even on Smartphones. The required setup
is shown in the lower figure.
Connection of the RGB-LED to pins D3, D5 and D6
The program
The new transmitted website is again placed in the Progmem variable site. Again,
you can view the HTML page in the Sketch folder. After setting the WLAN data and
uploading the program, the website of the web server can be reached via the IP of
the module. The page is designed similarly to the previous one in background colour
and headline. However, there is a new element on the page, i.e. the HTML5-element
Color Picker. It can be used to select a colour for the LED. Once you have confirmed
the colour, the LED will display it. The display of the Colour-Picker element may
differ strongly depending on the chosen browser.
Required parts
1 x pinboard, 1 x NanoESP, 1 x RGB-LED, 3 x resistor
1 kOhm (brown-black-red), circuit wire