User manual

Arduino™ is subject to continuous further development. Updates

can be downloaded free of charge from the web-

site

CONTENT OF THE

LEARNING PACKAGE

The learning package includes all parts that you need for the

experiments. Please check the parts for completeness before

starting the experiments!

Note

The Arduino™-UNO-micro controller PCB is not included in the

delivery. Since this is a learning package targeted at the

advanced Arduino™ programmer, an Arduino™ UNO or MEGA should

already be present at the workplace. The boards are available

at low costs at Conrad Electronic, in the Franzis Shop or at

other online businesses.

Parts List

1 x breadboard Tiny, 1 x LCD 16 x 2 blue, 1 x pin strip 16 pins

for soldering in, 1 x button, 1 x NTC 472, 1 x photo tran-

sistor, 1 x 10 kΩ, 1 x 2.2 kΩ, 1 x 330 Ω, 14 x jumpers

The Arduino™ PCBs and the display are mainly secured against

errors, so that it is hardly possible to damage the PC. The

connections of the USB-socket are not insulated on the bottom

of the PCB. If you place the PCB onto a metal conductor, there

may be a higher current, which may damage the PC and the PCB.

Observe the following safety rules!

Avoid metal objects under the PCB or insulate the entire bottom

with a non-conductive protective board or insulating tape.

Keep mains units, over voltage sources or live conductors with