User manual

49
13.1 Test at Low Current
Test setup: Plug board, red LED, resistor 100 Ω, battery holder, NiZn rechargeable
battery, micro AAA.
The tests can be performed with different rechargeable battery types as well
if you have a multimeter with which the rechargeable battery voltage under
load can be displayed.
The test at low current load usually is not a big problem even for older rechargeab-
le batteries that have been freshly charged. The button switch for the rechargeable
battery test is a piece of stripped wire, installed in the contacts of the plug board
as illustrated.
a)