User manual

Benötigte Bauteile
1 x Transistor 2N3906,
1 x Transistor 2N3904,
1 x Schottky-Diode BAT 85,
1 x LED rot,
1 x Widerstand 470 kOhm,
1 x Widerstand 100 kOhm,
1 x Widerstand 47 kOhm,
1 x Widerstand 22 kOhm,
1 x Widerstand 6,8 kOhm,
1 x Widerstand 1 kOhm,
2 x Widerstand 220 Ohm,
2 x Elektrolytkondensator 10 µF,
1 x Steckboard,
1 x Batterie 9 V mit Anschluß-Clip
Abb. 2.42: Aktiver
Batteriemonitor 8,5 V
Experiment
Ein elektronischer aktiver Batteriemonitor gibt jederzeit eindeutig Auskunft über den Zustand der überwachten Batterie. Die
vorliegende Schaltung zeigt folgendes Verhalten:
Batteriespannung Anzeige LED