User manual

4.14 Soldering Sensitive Components
Transistors and ICs are sensitive components that must not be heated for long. They
would be destroyed by it. Soldering must be performed quickly and precisely for this. The
faster you can solder a pin on sensitive components, the less thermal load is placed on
them. Soldering should be finished within 2-3 seconds.
When installing a transistor or IC, ensure correct installation position. Incorrectly soldered
components will not only lead to the circuit not working - they also may be destroyed.
Figure 54: Observe correct installation position when inserting the transistor.
Figure 55: The transistor connection should be soldered in within a few seconds.
39