Manualshelf

User manual

ManualsBrandsCONRAD COMPONENTS ManualsScience KitsCourse material Basic Löten lernen 14 years and over
31323334353637383940
Place the SMD diode on the installation area with pincers and continue to hold it while
fixating it with a soldering iron. For this, heat the diode at the side with the pre-tinned
pad for a second. Now the SMD diode is soldered on on one side. Last, solder the second
diode end as already known. Again, soldering should not exceed one second.
Figure 44: First, tin a pad with a little solder.
Figure 45: The SMD diode is very small even under a magnifying glass.
33