User's Manual

CQL1483-C Bluetooth Speaker
Instruction Manual (Read before proceeding)
Power:
z Please charge your Bluetooth speaker fully before its first use.
z Operates using an internal rechargeable Lithium battery.
To charge the battery:
z Using a Micro USB cable (included), insert the USB power cable into the micro USB
port located on the back of the speaker. Connect the other end of the USB cord into a
powered USB source such as a computer, laptop or USB AC adapter.
z When your Bluetooth speaker is charging, the indicator light is red.
z Once your Bluetooth speaker is fully charged, the red light will turn off.
Playing Music Via Bluetooth
z Turn your Bluetooth speaker on by sliding the power switch located on the back of the
speaker to ‘ON’ position.
z The indicator light is blue. This indicates that the speaker is in pairing mode and is
searching for your Bluetooth device.
z Make sure the Bluetooth function on your device is turned on.
z Search the speaker named,”SB-01”.
z Once you have selected the speaker, your device will pair without a password. (If your
device prompts for a password, enter the password”0000”.
z Once your speaker is paired, the indicator light will begin to flash blue slower.
z Start playing music on your device. Make sure that you keep your device within a 33
foot range of your Bluetooth speaker.
z Adjust the volume of your device to a comfortable level.
z Turn off the unit when not in used.
Universal Speaker Operation
z For devices that are not Bluetooth enabled, use the attached audio input
cable(included)
z Insert the 3.5mm input jack into the “AUX-IN” port.
z Turn on the unit by sliding the switch on the back of the Bluetooth speaker to the ‘ON’
position and start listening to music.
Warning:
z This is not a toy. Please keep away from children.
z Please keep away from water / heat.
z Low power may cause poor connection and/or may cause the Bluetooth function to
not work