Instruction Manual

CQL1602-B Bluetooth Speaker
Instruction Manual (Read before proceeding)
Power:
 Works on internal rechargeable Lithium battery. Please charge your speaker fully
before first use.
To charge the battery :
Using a
Micro
USB cable (included), insert the jack into ”Charging” jack located on the
back of the unit and then plug the USB connecter into the USB port on a computer for
charging.
 A red light will indicate the charging situation. When battery is full, the red light will
turn off automatically.
Bluetooth Speaker Operation

Turn on the unit by pushing the switch on the back to
“on “position , the RGB lights
on top is on.
 Open the Bluetooth function on your device and search the speaker named “SB-01”.
After selecting this speaker, a tone is heard after pairing is complete.
 Start playing music on your device. Keep your device within 33feet (10meter) of your
speaker.
 Adjust the volume of your device to a comfortable level.
 Turn off the unit by sliding the switch to “OFF” position when not in used.
Color Light Operation
 Turn on the color light by pushing the switchto “ON” position
 Translucent circle changes in 3 colors gradually.
 Turn off the color light by pushing the switch to “OFF” position
Caution:
 This is not a toy. Please keep away from small c hildren.
 Please keep awayfrom water / heat.
 Low power may cause poor connection even no working of Bluetooth.
 Do not over charge the battery.
 Battery pack shall not be exposed to excessive heat such as sunshine, fire or the like
FCC Statement
Changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of t he FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the